-
Shimano SM-BCC16 Di2 external battery charger power lead Carriage Free
External Di2 battery charger lead UK plug lead to be used in conjunction with SMBCR1 Di2 chargerColour BlackProduct Type Power Cables...
€ 10.00 -
Shimano SM-PCE02 PC interface device for E-tube SEIS Di2, SD50 and SD300 PC link cable
E-tube Di2 PC interface is required for quick and easy problem solving via your PC the PC interface simply plugs into any part of the electrical system and can test each component diagnosing the cause of any problems on your PC Can also be used to carry out firmware updates via the E-tube software...
€ 250.00 -
Shimano EW-SD300 E-tube Di2 electric wire, 1400 mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
€ 32.00 -
Shimano EW-SD300 E-tube Di2 electric wire, 1000 mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
€ 33.00 -
Shimano EW-SD300 E-tube Di2 electric wire, 700 mm, black
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
€ 29.99 -
Shimano EW-SD50 E-tube Di2 electric wire, 350mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine...
€ 29.99 -
-
Shimano EW-SD300 E-tube Di2 electric wire, 300 mm, black
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
€ 29.99 -
Shimano E-tube EW-JC130 Y-split cable, 3 connectors, 350 mm / 50 mm / 450 mm
E-tube SEIS Y-split electric wire (3 connectors) cable lengths 450 mm / 350 mm / 50 mm Reliable and secure water resistant connectorsColour Black
€ 69.00 -
SHIMANO EW-WU111 E-tube Di2 wireless unit, inline
E-tube Di2 D-FLY inline data transmission wireless unit Allows information to be sent wirelessly via ANT+ private network to compatible cycle computers Information can be displayed about gear position and Di2 battery level Clean integration and installation with E-tube system...
€ 94.00 -
Shimano EW-EC300 battery charging cable, 1700 mm
Di2 charger cable for the internal battery that will keep your Di2 system shifting Di2 uses a powerful long-life 7.4V Li-Ion battery: keep it in top condition and ready for shifting with this specific Shimano Di2 charger 1.5 hour charge time Plugs in directly to RDR9250 rear...
€ 52.00 -
Shimano SM-EW90-A E-tube Di2 Junction-A, 3 port
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts This junction A is required to connect the shifters via E-tube wires to the down tube junction wire...
€ 125.00 -
Shimano SM-JC41 E-tube Di2 bottom bracket Junction for internal wire routing
SM-JC41 E-tube cable junction for internal wire routing Junction is required for connection of rear mech, front mech, battery, and cable to battery indicator junction box To be positioned neatly inside frame tubing when connected Cables sold separately Reliable and secure water...
€ 36.00 -
PRO Di2 Seatpost Battery Mount, 30.9-31.6mm
Rubber mount for installing Shimano internal Di2 battery into seatposts without mount option as standardDiscipline RoadProduct Type Seatpost...
€ 10.00 -
Shimano EW-SD300 E-tube Di2 electric wire 350 mm
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable...
€ 29.99 -
-